Introduction

The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser - an efficient and versatile solution for external drive management.

Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.

Extend the value of this hard drive docking station further with the addition of our [%product id="SAT2IDEADP" text="SATA to IDE Hard Drive Adapter"%] (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.

The SATDOCK2REU3 is backed by a 2-year StarTech.com warranty and free lifetime technical support.

Benefits

• Quickly copy hard drives, with standalone sector by sector HDD/SSD duplication
• Securely erase up to two drives simultaneously, with Single Pass HDD overwriting
• Hassle-free access to drive data, with hot-swappable top slot-loading dock design that supports both 2.5in and 3.5in HDD/SSDs

Features

• Supports 2.5in and 3.5in form factor SATA hard drives (HDD) and solid state drives (SSD)
• Standalone Sector-by-Sector hard drive duplication
• Stand alone single pass overwrite erase
• SuperSpeed USB 3.0 compliant host interface, with up to 5 Gbps of data bandwidth
• High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps
• Supports SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
• Plug-and-Play and Hot-Swap compatible
• Universal Power Adapter (NA/UK/EU)
• Built-in LED progress bar

Specification

Drive Connectors: SATA Data & Power Combo (7+15 pin)

Host Connectors: USB Type-B (9 pin) USB 3.0

Operating Temperature: 0°C to 85°C (32°F to 185°F)

Storage Temperature: -10°C to 95°C (14°F to 203°F)

Humidity: 5-90%

Fan(s): No

Interface: USB 3.0

Number of Drives: 2

Drive Size: 2.5in & 3.5in

Compatible Drive Types: SATA

Drive Installation: Removable

Chipset ID: Prolific - PL2775

LED Indicators: HDD1 / 75%

HDD2 / 100%

Link / 25%

Power / 50%

Shipping (Package) Weight: 710 g [25.1 oz]

Type and Rate: USB 3.0 - 5 Gbit/s

SATA II (3 Gbps)

Duplication Modes: Sector by Sector (Whole Drive)

Erase Modes: 1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear)

Duplication Speed: 11GBpm

Max Drive Capacity: Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives

Product Length: 128 mm [5 in]

Product Width: 103 mm [4.1 in]

Product Height: 62 mm [2.4 in]

Product Weight: 610 g [21.5 oz]

Power Source: AC Adapter Included

Input Voltage: 110V-240V AC

Input Current: 1.2A

Output Voltage: 12 DC

Output Current: 3000mA

Center Tip Polarity: Positive

Plug Type: M

Power Consumption (In Watts): 36

OS Compatibility: OS independent; No software or drivers required

Note: Destination drive must be the same size or larger than the source drive

Included in Package: HDD Dock

USB 3.0 Cable

Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand

User Manual