Introduction
This Compact Flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive.
The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection.
Designed and constructed to provide a reliable media card platform, the CF IDE adapter is backed by StarTech.com s 2-year warranty.
Benefits
- Quick and driver free installation into any IDE 40 pin and 44 pin slot
- Easily swap cards in and out with built-in push button ejector
Features
- Quick and driver free installation into any IDE 40 pin and 44 pin slot
- Fully compatible with Compact Flash Type I/II and IBM Micro-drive
- Allows Compact flash card to be used as bootable storage
- Easy to use jumpers offer simple master/slave drive setting
- Can be mounted in the front or rear panel of your case, to fit into any 3.5" bay or available expansion slot
- Easily swap cards in and out with built-in push button ejector
Specification
- Quick and driver free installation into any IDE 40 pin and 44 pin slot
- Easily swap cards in and out with built-in push button ejector
Features
- Quick and driver free installation into any IDE 40 pin and 44 pin slot
- Fully compatible with Compact Flash Type I/II and IBM Micro-drive
- Allows Compact flash card to be used as bootable storage
- Easy to use jumpers offer simple master/slave drive setting
- Can be mounted in the front or rear panel of your case, to fit into any 3.5" bay or available expansion slot
- Easily swap cards in and out with built-in push button ejector
Specification
- Quick and driver free installation into any IDE 40 pin and 44 pin slot
- Fully compatible with Compact Flash Type I/II and IBM Micro-drive
- Allows Compact flash card to be used as bootable storage
- Easy to use jumpers offer simple master/slave drive setting
- Can be mounted in the front or rear panel of your case, to fit into any 3.5" bay or available expansion slot
- Easily swap cards in and out with built-in push button ejector
Specification
Drive Connectors: CompactFlash (50 pin) Slot
Host Connectors: IDE (40 Pin, EIDE/PATA) Male
SP4 (4 pin, Small Drive Power) Male
Operating Temperature: -55°C to 85°C (-67°F to 185°F)
Storage Temperature: -55°C to 85°C (-67°F to 185°F)
Humidity: 5% ~ 85% RH
Interface: IDE
Shipping (Package) Weight: 0.3 kg [0.6 lb]
Maximum Data Transfer Rate: 133 MBps
Memory Media Type: CF (Compact Flash I/II Card)
Product Length: 97 mm [3.8 in]
Product Width: 100 mm [3.9 in]
Product Height: 25 mm [1 in]
Product Weight: 145 g [5.1 oz]
OS Compatibility: OS independent; No software or drivers required
Note: This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.
Included in Package: Compact Flash to IDE Adapter
3.5" Enclosure
Full Profile Expansion Slot Bracket
SP4 to LP4 Molex Power Cable
Instruction Manual