Introduction
This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.).
The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.
Convenience and cost savings
This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn't available.
Easy to set up in mixed environments
You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that's perfect for installing on walls or under a desk, but it's also palm-sized, for use on desktop surfaces.
Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow.
Intelligent power allocation
Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device.
The POEINJ1GW is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Features
- Easily connect, power, and operate a Gigabit PoE-powered device (PD)
- Supplies up to 30-watts power output
- Flexible setup, with a desktop-sized, or surface-mountable housing
- Save money by using your existing Cat5 or better Ethernet cable
- Fast, plug-and-play setup and operation, with no configuration required
- Provides one PoE+ (PSE, power and data) 10/100/1000Mbps compliant RJ45 port - 802.3at and 802.3af
- Integrates shielded RJ45 connectors
- Automatically detects the powered device to provide the appropriate level of power output
Specification
- Easily connect, power, and operate a Gigabit PoE-powered device (PD)
- Supplies up to 30-watts power output
- Flexible setup, with a desktop-sized, or surface-mountable housing
- Save money by using your existing Cat5 or better Ethernet cable
- Fast, plug-and-play setup and operation, with no configuration required
- Provides one PoE+ (PSE, power and data) 10/100/1000Mbps compliant RJ45 port - 802.3at and 802.3af
- Integrates shielded RJ45 connectors
- Automatically detects the powered device to provide the appropriate level of power output
Specification
Connector Type(s): RJ-45 Female
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Storage Temperature: -20°C to 85°C (-4°F to 185°F)
Humidity: 10~90% RH (Non-Condensing)
Ports: 1
Industry Standards: IEEE 802.3af PoE, IEEE 802.3at PoE+
IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T)
LED Indicators: Power
Shipping (Package) Weight: 1 kg [2.3 lb]
Maximum Data Transfer Rate: 2 Gbps (Full-Duplex)
Maximum Cable Length: 100 m [328 ft]
Power Output: Power Output: 48 V DC, 30 W
Color: Black
Enclosure Type: Plastic
Product Length: 70 mm [2.8 in]
Product Width: 63 mm [2.5 in]
Product Height: 25 mm [1 in]
Product Weight: 50 g [1.8 oz]
Power Source: AC Adapter Included
Input Voltage: 100 ~ 240 AC
Input Current: 0.75 A
Output Voltage: 56 DC
Output Current: 0. 64 A
Center Tip Polarity: Positive
Plug Type: M
Power Consumption (In Watts): 36
Patents and Licenses: The following patents are licensed for this product. This list might not be all inclusive.
System and Cable Requirements: If your connected devices do not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEINJ1GW will not inject power to the connected device(s) / Ethernet cable(s)
Included in Package: Gigabit midspan
screws
universal power adapter
power cords (EU, UK, ANZ)
quick-start guide