Introduction
The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.
The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.
Benefits
- Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
- Hassle-free installation, with no software CD required
- Backed by a StarTech.com 2 year warranty and free lifetime technical support
Features
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
- Support for 48-bit Logical Block Addressing (LBA)
- Compliant with SATA revision 1.0 specification
- Supports SATA I/II/III (1.5/3/6Gbps) drives
- Compatible with Ultra ATA 133 specification
- Supports 2.5", 3.5", and 5.25" SATA Drives
- ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
Specification
- Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
- Hassle-free installation, with no software CD required
- Backed by a StarTech.com 2 year warranty and free lifetime technical support
Features
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
- Support for 48-bit Logical Block Addressing (LBA)
- Compliant with SATA revision 1.0 specification
- Supports SATA I/II/III (1.5/3/6Gbps) drives
- Compatible with Ultra ATA 133 specification
- Supports 2.5", 3.5", and 5.25" SATA Drives
- ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
Specification
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
- Support for 48-bit Logical Block Addressing (LBA)
- Compliant with SATA revision 1.0 specification
- Supports SATA I/II/III (1.5/3/6Gbps) drives
- Compatible with Ultra ATA 133 specification
- Supports 2.5", 3.5", and 5.25" SATA Drives
- ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
Specification
Connector Type(s): IDE (40 Pin, EIDE/PATA)
SATA Data & Power Combo (7+15 pin)
SP4 (4 pin, Small Drive Power)
Operating Temperature: 5°C to 50°C (40°F to 122°F)
Storage Temperature: -25°C to 80°C (-13°F to 176°F)
Humidity: 15~90% RH
Interface: IDE
Number of Drives: 1
Drive Size: 2.5in & 3.5in
Compatible Drive Types: SATA
Chipset ID: Marvell - 88SA8052
Shipping (Package) Weight: 80 g [2.8 oz]
Maximum Data Transfer Rate: 133MB/sec
RAID: No
Enclosure Type: Steel and Plastic
Product Length: 75.5 mm [3 in]
Product Width: 20 mm [0.8 in]
Product Height: 23 mm [0.9 in]
Product Weight: 15 g [0.5 oz]
OS Compatibility: OS independent; No software or drivers required
System and Cable Requirements: An IDE controller and ATA cable (not included).
Included in Package: IDE to SATA adapter
LP4 Molex to SP4 Power Cable
Instruction Manual