Introduction
The MCM110SC2EU 10/100 Multi Mode Fiber Ethernet Media Converter (SC, 2 km) creates a cost-effective Ethernet-fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals, to extend an Ethernet network connection over an SC-terminated multimode fiber backbone.
The converter supports a maximum multimode fiber optic cable distance of 2 kilometers (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance and scalability.
This versatile Ethernet to Fiber converter is compatible with most 3COMT, CiscoT, LucentT and NortelT networks and fully complies with applicable IEEE 802.3 standards.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Benefits
- Improve network scalability by increasing the distances between network points by up to 2km (Multi-mode)
- Compact, lightweight enclosure is easily mounted or placed into any location with little to no configuration needed
- Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion
Features
- Supports a maximum multimode fiber optic cable distance of 2 km
- Compatible with most 3COMT, CiscoT, LucentT and NortelT networks
- Supports transparent Q-in-Q double tagged frames
- Supports Link Fault Pass-through (LFP)
- Supports IEEE 802.1q Tag VLAN pass-through
- Supports flow control (Pause)
- Provides switch configuration of half/full duplex transfer modes for FX port
- LED Indicators for simple Ethernet/Fiber network link monitoring
- Forward 9K jumbo packets in converter mode
- Auto negotiation or Force 10/100 Mbps and MDI/MDI-X (Crossover for TX port)
- Auto-detects half/full duplex transfer mode from the TX port
- Compact design
- Simple installation
Specification
- Improve network scalability by increasing the distances between network points by up to 2km (Multi-mode)
- Compact, lightweight enclosure is easily mounted or placed into any location with little to no configuration needed
- Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion
Features
- Supports a maximum multimode fiber optic cable distance of 2 km
- Compatible with most 3COMT, CiscoT, LucentT and NortelT networks
- Supports transparent Q-in-Q double tagged frames
- Supports Link Fault Pass-through (LFP)
- Supports IEEE 802.1q Tag VLAN pass-through
- Supports flow control (Pause)
- Provides switch configuration of half/full duplex transfer modes for FX port
- LED Indicators for simple Ethernet/Fiber network link monitoring
- Forward 9K jumbo packets in converter mode
- Auto negotiation or Force 10/100 Mbps and MDI/MDI-X (Crossover for TX port)
- Auto-detects half/full duplex transfer mode from the TX port
- Compact design
- Simple installation
Specification
- Supports a maximum multimode fiber optic cable distance of 2 km
- Compatible with most 3COMT, CiscoT, LucentT and NortelT networks
- Supports transparent Q-in-Q double tagged frames
- Supports Link Fault Pass-through (LFP)
- Supports IEEE 802.1q Tag VLAN pass-through
- Supports flow control (Pause)
- Provides switch configuration of half/full duplex transfer modes for FX port
- LED Indicators for simple Ethernet/Fiber network link monitoring
- Forward 9K jumbo packets in converter mode
- Auto negotiation or Force 10/100 Mbps and MDI/MDI-X (Crossover for TX port)
- Auto-detects half/full duplex transfer mode from the TX port
- Compact design
- Simple installation
Specification
Local Unit Connectors: RJ-45 Female
Remote Unit Connectors: Fiber Optic SC Duplex Female
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Storage Temperature: -10°C to 70°C (14°F to 158°F)
Humidity: 10~90% RH
PoE: No
WDM: No
Industry Standards: IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-FX
IEEE 802.3u 100BASE-TX
LED Indicators: Ethernet Link & Activity (ON - Fiber Link ok, Blinking - Activity on Fiber Link)
FEF [Far End Fault](On - Fault Detected, Off - No Fault)
Fiber Link & Activity (On - Fiber Link ok, Blinking - Activity on Fiber Link)
Full ( Full duplex / Half duplex)
Power
Speed (10 or 100 Mbps)
Shipping (Package) Weight: 0.3 kg [0.6 lb]
Maximum Data Transfer Rate: 10/100Mbps
Max Transfer Distance: 2 km (1.2 mi)
Fiber Type: Multi Mode
Wavelength: 1310nm
Fiber Operating Mode: Half/Full-Duplex
MTBF: 65,000 Hours
Color: Black
Product Length: 95 mm [3.7 in]
Product Width: 75 mm [3 in]
Product Height: 20 mm [0.8 in]
Product Weight: 90.5 g [3.2 oz]
Power Source: AC Adapter Included
Input Voltage: 230 AC
Output Voltage: 12 DC
Output Current: 0.2A
Center Tip Polarity: Positive
Plug Type: M
Power Consumption (In Watts): 2.4
Included in Package: Media Converter
Power Adapter
User s Manual