Introduction
APC Smart-UPS X 2200VA Short Depth Tower/Rack Convertible LCD 200-240V with Network Card
Features
- Cold-start capable : Provides temporary battery power when the utility power is out.
- Energy meter : Provides actual kilowatt hours of usage for energy conscious users.
- Green mode : Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- High online efficiency : Reduces utlility costs, generates less heat.
- Intuitive LCD interface : Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Multiple switched outlet groups : Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- Predictive replace battery date : Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Preinstalled network management card : Provides for remote management and control of the UPS over a network out of the box.
- SmartSlot :
Customize UPS capabilities with management cards.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Specifications
Output
- Output power capacity : 1.98 KWatts / 2.2 kVA
- Max Configurable Power (Watts) : 1.98 KWatts / 2.2 kVA
- Nominal Output Voltage : 208V , 230V
- Output Voltage Distortion : Less than 5%
- Output Frequency (sync to mains) : 50/60Hz +/- 3 Hz
- Other Output Voltages : 208, 220, 240
- Topology : Line Interactive
- Waveform type : Sine wave
- Output Connections
- (2) IEC 320 C19 (Battery Backup)
- (2) IEC Jumpers (Battery Backup)
- (8) IEC 320 C13 (Battery Backup)
- Transfer Time :
6ms typical : 10ms maximum
Input
- Nominal Input Voltage : 208V , 230V
- Input frequency : 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections : British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P
- Cord Length : 6.56ft ( 2meters )
- Input voltage range for main operations : 140 - 280V
- Number of Power Cords : 1
- Other Input Voltages :
220, 240
Batteries & Runtime
- Battery type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time : 3hour(s)
- Expected Battery Life (years) : 3 - 5
- RBC Quantity : 1
- Extendable Run Time : 1
- Battery Volt-Amp-Hour Capacity : 702
Communications & Management
- Interface Port(s) : RJ-45 10/100 Base-T , RJ-45 Serial , SmartSlot , USB
- Pre-Installed SmartSlotT Cards : AP9631
- Control panel : LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
- Audible Alarm : Alarm when on battery : distinctive low battery alarm : configurable delays
- Emergency Power Off (EPO) : Yes
Surge Protection and Filtering
- Surge energy rating : 645Joules
- Filtering : Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
- Maximum Height : 17.0inches ( 432mm , 43.2cm )
- Maximum Width : 7.0inches ( 178mm , 17.8cm )
- Maximum Depth : 19.0inches ( 483mm , 48.3cm )
- Rack Height : 4U
- Net Weight : 85.0lbs. ( 38.56kg )
- Color : Blackllet 6.0
No options for this product