Protective cover for the U7 Pro that can be painted for a custom appearance.

The ceiling AP on steroids! Our bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models, the improved high-gain antenna increases the covered area by up to 100%!Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it, so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc.Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.

2x2 MIMO airMAX ac Sector APThe LiteAP ac is an ultra-lightweight airMAX ac Access Point with incredible performance and disruptive pricing.airMAX ac Sector CoverageThe LiteAP ac features a 2x2 MIMO antenna and communicates with multiple airMAX ac CPEs within a 120° coverage area.GPS SynchronizationLiteAPTM GPS supports GPS Sync for faster, more scalable, carrier-class networks, with 90% higher throughout than competing solutions.Now with airOS8airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.Lightweight and Sleek DesignThe LiteAP ac features a lightweight antenna with an integrated radio in a sleek and highly efficient design.Installation FlexibilityFeaturing the freedom of three-axis alignment, the LiteAP ac fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.

Ubiquiti NanoStation M5. Maximum data transfer rate: 150 Mbit/s, Ethernet LAN data rates: 10,100 Mbit/s, Frequency band: 4.9 - 5.9 GHz. AC input voltage: 24 V, Input current: 0.5 A, Power consumption (typical): 8 W. Product colour: White, Certification: FCC, CE, RoHS. Antenna gain level (max): 16 dBi. Processor model: Qualcomm Atheros, Processor architecture: MIPS 24Kc, Flash memory: 8 MB

The sleekest tri-band Access Point in the Industry.

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connectionsUnits are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

The Cisco 10GBASE-SR SFP Module delivers a wide variety of 10-Gigabit Ethernet connectivity options for data centre, enterprise server room and service provider transport applications. This hot-swappable input/output transceiver plugs into an Ethernet Enhanced Small Form-factor Pluggable (SFP+) port of a Cisco switch and offers optical interoperability with 10GBASE XENPAK, 10GBASE X2 and 10GBASE XFP interfaces on the same link.

Ubiquiti Networks launches the latest generation of airMAX CPE (Customer Premises Equipment), the NanoBeam® 2AC with dedicated Wi-Fi management.Improved Noise ImmunityThe NanoBeam 2AC directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 2AC blocks or spatially filters out noise, so noise immunity is improved. Thisfeature is especially important in an area crowded with other RF signals of the same or similar frequency.Integrated DesignThe radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 2AC gets maximum gain out of the smallest footprint.Providing high performance and an innovative form factor, the NanoBeam 2AC is versatile and cost-effective to deploy.

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:- airFiber®- airMAX®- EdgeMAX®- mFi®- UniFi® AP- UniFi Video / airVision®ProtectionUbiquiti PoE Adapters provide a variety of features to help protect your PoE devices:- Surge protection- Clamping protection- Maximum surge discharge- Peak pulse current- AC cable with earth ground