Ubiquiti Poe Adapter For Protect Wifi Cameras, Suitable For G4 Instant & G4 Doorbell Pro, No Cable

LogiLink’s shielded keystone patch panels are specifically designed for modular Cat.6A 10GE cabling. The metal housing with additional shielding plate can be placed on any table or wall surface. All Keystone modules with a narrow design, for example LogiLink's Cat.6A Keystone Jack NK4000, are suitable for installation. The strain relief on the back of the device ensures high stability. Together with LogiLink's DIN rail brackets MP0049, the device can also be mounted on any standard 35 mm DIN rail.

A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE.

A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output.

It’s all about the power...This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that!All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those.Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to PoE-out features, the new RB5009 can trade blows with our legendary PoE switches: CRS354 & CRS328. In the smallest possible form-factor and for the best price on the market!Protect your uptime, protect your tranquility!So what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24V on the DC jack, 48V on the 2-pin connector, and 57V on the PoE-in. The board itself gets powered by the highest voltage input – the PoE-in. If there’s a problem, RB5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24V option on the DC jack.What about the PoE-out devices? Once again – the highest voltage wins. PoE-out devices will draw power from the 48V source on the 2-pin connector. If that fails – the 24V on the DC jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the PoE-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually.This tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount FOUR of these routers in a single 1U rackmount spaceWith the new RB5009, we want to empower all the small and medium ISPs that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous GPEN devices – a line of products designed to replace the expensive GPON solutions.With so many powering options and a durable metallic case, the new RB5009 redefines affordable reliability.

ESD Protection for Outdoor High-Speed NetworksIntroducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipmentcompatibility.Ideal for WISP NetworksAll Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential.For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building.Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safelydischarged into the ground.

- For mounting on DIN-Rail 35 mm- For carrying of RJ45 jacks and couplers with snap-in mounting (14 x 16 mm)- Available as 1-port- or 2-port version, unloaded- Solid metal bracket- 1.5 mm stainless steel

Product information "1.25 Gbps SFP Transceiver Module SM 20 km LC" from LogiLink ProfessionalLogiLink's mini-GBIC (SFP) transceiver family offers the highest quality and reliability. Whether for switch-to-switch, converter-to-switch, converter-to-converter, the wide range of LogiLink modules allow flexible use of fiber optic technology. Compliance with the MSA (Multi-Source Agreement) standard ensures compatibility with third-party products.

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDMUnits are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.

Protective cover for the U7 Pro that can be painted for a custom appearance.