ESD Protection for Outdoor High-Speed NetworksIntroducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipmentcompatibility.Ideal for WISP NetworksAll Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential.For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building.Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safelydischarged into the ground.

Protective cover for the U7 Pro that can be painted for a custom appearance.

The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.Management Wi-Fi RadioThe LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Mounting and Surge ProtectionFeaturing enhanced protection against ESD events, the LiteBeam® AC offers a more robust mount with separate azimuth and elevation adjustments.Now with airOS®8 and airView®airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.High-Gain, Directional, 2x2 MIMO AntennaThe LiteBeam® AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial DesignFeaturing the freedom of three-axis alignment, the LiteBeam® AC fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.Compact in Size, Light in WeightA lightweight form factor contained within ultra-compact packaging, the LiteBeam® AC is ideal for shipping and logistics.

2x2 MIMO airMAX ac Sector APThe LiteAP ac is an ultra-lightweight airMAX ac Access Point with incredible performance and disruptive pricing.airMAX ac Sector CoverageThe LiteAP ac features a 2x2 MIMO antenna and communicates with multiple airMAX ac CPEs within a 120° coverage area.GPS SynchronizationLiteAPTM GPS supports GPS Sync for faster, more scalable, carrier-class networks, with 90% higher throughout than competing solutions.Now with airOS8airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.Lightweight and Sleek DesignThe LiteAP ac features a lightweight antenna with an integrated radio in a sleek and highly efficient design.Installation FlexibilityFeaturing the freedom of three-axis alignment, the LiteAP ac fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.

Ubiquiti NanoStation M5. Maximum data transfer rate: 150 Mbit/s, Ethernet LAN data rates: 10,100 Mbit/s, Frequency band: 4.9 - 5.9 GHz. AC input voltage: 24 V, Input current: 0.5 A, Power consumption (typical): 8 W. Product colour: White, Certification: FCC, CE, RoHS. Antenna gain level (max): 16 dBi. Processor model: Qualcomm Atheros, Processor architecture: MIPS 24Kc, Flash memory: 8 MB

The sleekest tri-band Access Point in the Industry.

Ubiquiti Networks launches the latest generation of airMAX CPE (Customer Premises Equipment), the NanoBeam® 2AC with dedicated Wi-Fi management.Improved Noise ImmunityThe NanoBeam 2AC directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 2AC blocks or spatially filters out noise, so noise immunity is improved. Thisfeature is especially important in an area crowded with other RF signals of the same or similar frequency.Integrated DesignThe radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 2AC gets maximum gain out of the smallest footprint.Providing high performance and an innovative form factor, the NanoBeam 2AC is versatile and cost-effective to deploy.

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:- airFiber®- airMAX®- EdgeMAX®- mFi®- UniFi® AP- UniFi Video / airVision®ProtectionUbiquiti PoE Adapters provide a variety of features to help protect your PoE devices:- Surge protection- Clamping protection- Maximum surge discharge- Peak pulse current- AC cable with earth ground

Compact, ruggedized, and carrier unlocked LTE Cat 4 mobile WiFi router designed for indoor/outdoor IoT applications.

The airFiber X antennas are purpose-built with 45° slant polarity for seamless integration with the AF-5X.